Connect with us

Really three new Japan miniature solenoid valve electronic sphygmomanometer valve a normally open carbon

discount 70% in 2018-09-24 to 2018-09-26
price: USD$ 7.56
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Minimum Order Quantity:2
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Japan MITSUMI three miniature solenoid valve electronic sphygmomanometer arm a normally open valve

[basic parameters]
Brand: Japan MITSUMI three
Model: R-14
Specification: 20*15.2*13mm (length * width * height)
Using fluids: gases
Rated voltage: DC 6V
Time to lose: MAX4s
Life test: 35000Times
Insulation class: B
Impedance: 100 ohms
Weight: 17.4g

Application: it is mainly used for quick exhaust of electronic sphygmomanometer. It can also be used in other occasions of on-off control. Normally open.
[related links]
Tracheal link:
1. scope of application: this specification applies to the use of R-14
2. test environment:
2-1 test ambient temperature: ambient temperature of 20 degrees, relative humidity of 65%RH as the standard, if there is no dispute can occur in the following environmental testing:
The relative humidity was 5-30 40-85%RH at ambient temperature
2-2 test position: level
2-3 load: air pressure 300mmHg
3 stop condition:
3-1 stop voltage: DC6.0V
3-2 use voltage range: DC4.0V~7.2V
3-3 rated current: 60 + 10%mA.
3-4 DC impedance: 100 + 10% ohms
3-5 use maximum pressure: 350mmHg
3-6 commonly used pressure: 0~300mmHg
3-7 air tight: less than 3.0mmHg/min in the 500CC container, inflatable at 300 + 30mmHg pressure after stopping inflation, stability
After 30 seconds, the reduction pressure should be less than 3.0mmHg/
3-8 exhaust speed: in the 500CC container, the pressure from 300mmHg pressure to 15mmHg will take less than 5 seconds
3-9 temperature rise: continuous voltage DC6.0V to saturation below 50 degrees Celsius
3-10 insulation resistance: tested under normal temperature and constant humidity environment. The insulation between the coil and the metal passes through the DC500V, and the insulation impedance is above 50MOHM
3-11 insulation withstand voltage: AC600/1mA, between coil and metal test 1S no breakdown
3-12 use temperature range: 0oC~45oC

3-13 storage temperature range: -25~60oC