Menu

Connect with us

Really three Japanese MITSUMI Sanmei miniature solenoid valve electronic sphygmomanometer in a normally open valve

price:USD$12.00
discount 70% in 2018-09-21 to 2018-09-23
price: USD$ 8.40
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Minimum Order Quantity:2
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

All the motors and motors in this shop are in stock and have stock. What can be done directly? The goods are shipped on the same day, and more than one kind of goods are purchased.

Japan MITSUMI three miniature solenoid valve electronic sphygmomanometer arm a normally open valve

[basic parameters]
 
Brand: Japan MITSUMI three
 
Model: R-14
 
Specification: 20*15.2*13mm (length * width * height)
 
Using fluids: gases
 
Rated voltage: DC 6V
 
Time to lose: MAX4s
 
Life test: 35000Times
 
Insulation class: B
 
Impedance: 100 ohms
 
Weight: 17.4g
 

Application: it is mainly used for quick exhaust of electronic sphygmomanometer. It can also be used in other occasions of on-off control. Normally open.
 
 
[related links]
Tracheal link:
[details]
1. scope of application: this specification applies to the use of R-14
2. test environment:
2-1 test ambient temperature: ambient temperature of 20 degrees, relative humidity of 65%RH as the standard, if there is no dispute can occur in the following environmental testing:
The relative humidity was 5-30 40-85%RH at ambient temperature
2-2 test position: level
2-3 load: air pressure 300mmHg
3 stop condition:
3-1 stop voltage: DC6.0V
3-2 use voltage range: DC4.0V~7.2V
3-3 rated current: 60 + 10%mA.
3-4 DC impedance: 100 + 10% ohms
3-5 use maximum pressure: 350mmHg
3-6 commonly used pressure: 0~300mmHg
3-7 air tight: less than 3.0mmHg/min in the 500CC container, inflatable at 300 + 30mmHg pressure after stopping inflation, stability
After 30 seconds, the reduction pressure should be less than 3.0mmHg/
3-8 exhaust speed: in the 500CC container, the pressure from 300mmHg pressure to 15mmHg will take less than 5 seconds
3-9 temperature rise: continuous voltage DC6.0V to saturation below 50 degrees Celsius
3-10 insulation resistance: tested under normal temperature and constant humidity environment. The insulation between the coil and the metal passes through the DC500V, and the insulation impedance is above 50MOHM
3-11 insulation withstand voltage: AC600/1mA, between coil and metal test 1S no breakdown
3-12 use temperature range: 0oC~45oC

3-13 storage temperature range: -25~60oC