Connect with us

Midea microwave oven panel membrane switch EG700FA5-NS/EG823EA5-NSEG720FA5-NS

discount 70% in 2018-10-16 to 2018-10-18
price: USD$ 4.90
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Minimum Order Quantity:2
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Please confirm the washing machine fault before purchase

How to determine the washing machine fault judgment

First, common failures of water supply

1、askWhat is the trouble of washing clothes after starting?

      answerThe water level switch is bad, or the leakage of the water level switch skin pipe. Solution: replace the water level switch, seal the ends of the tube with glue. If it can't be solved, replace the computer board.

2、askWhat is the trouble of opening the power supply without starting the water?

      answerWater inlet valve is bad, cause the computer to plate out solution: to the inlet valve with computer board and replace in order to solve the fault, the computer board will burn or change alone.

Two, washing clothes common faults

1、ask(1) boot does not start to turn; 2) after the water is finished, wash clothes side turn or can not turn what is the fault?

answerThe computer board burnt out, the motor partial short circuit or burnt out, the capacitor is bad. Solution: the amount of electrical resistance (normal resistance two secondary winding sum = main winding), the resistance capacitance motor normal, normal replacement of the computer board can be solved, such as electric resistance is not equal, the need for a computer board with motor.

2、askWhen the water is normal, what will happen when the laundry procedure will drain?

answerThis fault should be the hand washing machine, the drainage tractor is three lines, the distance between the drainage tractor and the drain valve plug is too short. Solution: adjust the clutch handle screw, make long distance point, or change a single trip (the tractor on both sides and then cut the line, connected to the computer board hand rubbing function can solve the fault line. There is no need to replace the computer board

3、askAccording to the start can not water, wash clothes directly what is the fault?

answerIf the water level switch fails, the water level switch can be replaced, and the computer board can not be replaced if the water level switch is not solved.

4、askWhen the water is over, what's wrong with the alarm when washing clothes?

answerGeneral: bucket balance fault LG., Matsushita washing machine with a dry reed pipe protection, should cover magnet off, the solution can suck and dry reed pipe failure: adjust the bucket balance. The problem of the reed switch is solved by installing the magnet on the cover.

5、askWhat is the trouble of washing the clothes and not getting the drainage dehydration procedure?

answerBucket balance failure is usually the problem of one side of the barrel inside the barrel. Solution: short circuit board computer socket (short barrel balance method: find the computer board socket, plug in the computer board in the computer board corresponding to the socket of the line peel, can be directly twisted together).

Three. Common failures of drainage

1、askStart the drain valve is not opened, according to the start after the drainage side of the water, what is the fault?

answerThe drain valve is bad and the computer board is burnt out. Solution: the computer board and drain valve can be replaced simultaneously.

2、askWater, washing clothes normal, can not drain, not dehydration, try what fault?

answerDrain valve burned, causing the computer board burned out. Solution: replace the drain valve with the computer board at the same time.

Four. Common failures of dehydration

1、askOther programs are normal, that is, can not be dehydrated, drain or start drainage alarm, display fault code is what fault?

answerThe door switch is broken, and the bucket balance switch is broken. Solution: door switch with short circuit computer barrel switch socket can balance (short circuit method: find the computer board socket, plug in the computer board in the computer board corresponding to the socket of the line peel, can be directly twisted together).

2、askOther procedures are normal, can not be dehydrated, drained, and so on 4 minutes or so on the alarm, or not alarm what failure?

answerWater level switch fault, solution: replace water level switch.

3、askOther procedures are normal, can not be dehydrated, dehydration as slow as washing clothes, what is the fault?

answerThis fault is when there is no drainage drainage valve to open the clutch fault solution: adjust the clutch handle screw, the drain valve with drainage plug between the short distance adjustment point, the clutch handle can be opened in place.

Five, alarm common faults

1, ask: start the alarm, display the fault code is what fault?

Answer: usually start the alarm or start the alarm, it is the water level switch problem. Replace the water level switch, check whether the contact line is bad, can be resolved, if not solved, then replace the computer board.

Note: washing machine alarm, fault code, general washing machine instructions have the corresponding instructions, in accordance with the fault code to judge the fault range, no instructions, use Baidu Search.

After sales according to the process

First, after sales instructions:

The quality of the washing machine computer board within one year (color classification marked time to be marked), 15 days no reason to return. (statement: the computer board breaks, does not change, the bad review directly pull black list, equivalent to the buyer automatically give up after sale)

Two, freight description:

  1. Refund of any reason within 1-15 days, only refund the goods, can not refund the freight, please understand!
  2. Replacement within 1-30 days, the quality problems of freight (AA that buyers returned to the buyers to pay the freight, the shop in the past, we pay the freight). Return to product testing no problem, buyers bear back and forth freight.
  3. 30 days after 1 years of quality problems replacement, buyers bear back and forth freight.