discount 70% in 2018-10-14 to 2018-10-16
price: USD$ 2023.00
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
Must read before buying:
Dear customers, please note before the clip, the regulator does not necessarily have the spot, and if necessary, you can contact the customer to explain how much power you need, you are sure that we are arranging production,Non quality problems are not returnedPlease see it again. Baby overweight!(marked freight only for reference, specific freight, please contact customer service!)
Because the regulator is heavy.JiangsuExpress delivery.Other uniform logistics freight(if you need express service in other areas, please contact customer service to change the freight price)We usually deal with general logistics.Freight forwarding.If you don't want to pick up the goods, you should pay the freight back and forth.
We support the Nadu, world arima. Jiaji formal logistics.
Our default hair General Logistics for Debon, world ARIMA Kakichi, the three logistics, please contact customer service.
- product features
This series of products has the following characteristics:
It can continuously adjust the output voltage of 0 - 250V, and has the characteristics of no distortion, small size, light weight, high efficiency, convenient operation, reliable performance, long term operation, etc..
In the range of use
This series of pressure regulator can be widely used in industry (such as chemical engineering, metallurgy, instrumentation, machinery manufacturing, light industry etc.), scientific experiments, utility equipment, household appliances, in order to achieve voltage regulation, temperature control, speed, power and dimming control purposes, is an ideal AC voltage electrical appliances.
- Technical Parameters
Rated input voltage range (V)
Output voltage range (V)
- Specifications and installation size
Rated output current (A)
Product size (CM)
TDGC2 series single phase electric voltage regulator
In the installation, use and maintenance
1、The power supply voltage shall conform to the input voltage on the nameplate of the regulator;
2、The voltage regulator must be grounded properly to ensure safety;
3、The output current should not be more than the rated value, otherwise the life of the regulator will be reduced or even burned down;
4、When using, the handwheel should be rotated slowly and evenly, so as not to cause the brush damage or spark;
5、The use of voltage regulator should be checked frequently, such as excessive wear, defects, timely change of the same specifications of the brush, and zero sandpaper pad under the brush rotating handwheel several times, so that brush bottom surface grinding, good contact, you can use;
6、The surface of the coil contact with the brush should be kept clean, otherwise it will increase the spark and burn the coil surface. If the surface of the coil is burnt with black spots, it can be wiped with cotton alcohol until the surface spots are removed;
7、From the power supply to the voltage regulator, the voltage regulator connected to the load wire and wire terminals should be in good contact and can pass the rated current of the regulator;
8、The handwheel shall not be used when the regulator is moved, or the handle or the whole product will be moved;
9、The regulator needs large panel transverse or vertical installation in other base can be used for regulating transformer base mounting holes to be fixed;
10、The regulator is often protected clean, no water drops, oil, etc. fall into the regulator, the regulator must regularly cut off the internal accumulation of dust;
- use matters needing attention
This series of voltage regulators should be used indoors, and the normal operating conditions are as follows:
1,Ambient temperature: 15 DEG C 45.
2,The altitude is no more than 1000m.
3,Relatively modest: less than 90%.
4,Power voltage waveform: the voltage waveform of the power supply is approximately sinusoidal.
5,The installation site shall have no serious influence on the gas, steam, chemical deposition, dust, dirt and other explosive and corrosive medium of the insulation of the regulator, and there shall be no serious vibration or jolt in the installation site.
7,No parallel connection is used, otherwise the voltage regulator will be burnt out.
This shop promises that all the power supply in our shop will be guaranteed for one year, free maintenance for life, and the material will be charged after the damaged parts after the warranty period.
Buyers need to know
One, not quality problems return: back and forth freight you need to bear. In case of product packaging and parts missing, please accept that we can not accept the exchange request again.
Two, special custom-made goods, not quality problems, not to return, please confirm before you buy.Note: because the transformer is basically custom made, if not the quality problem, do not accept the returned goods. Thank you for understanding!
Three, quality problem replacement: freight by the seller, you want to send the goods back to our company, we will send the goods to you. If you urgently, required to deliver goods to you, put the goods back to us, you have to first thegoodstaken, after the payment, we shipped to you. When you return the goods to us, you will apply for a refund, and we will refund the money to you.
Four, because it is electrical products,againCareful packaging, but also can not resist the big brother parabolic loadingAnd the hardships of the journey！So pleaseAfter buyer receives the goods,Be sure to be yourselfFirst inspection and then sign. IfGoods damaged, please buyer refused to face back to express companyBy courier company to compensate！Once the receipt, because the product appearance damage and other issues, our shop is not responsible. This statement is to avoid your and our rights and interests have been hurt, please understand!