Menu

Connect with us

TDGC2-70KVA adjustable single phase and old type contact voltage regulator 0V-250V300V adjustable

price:USD$6700.00
discount 70% in 2018-09-26 to 2018-09-28
price: USD$ 4690.00
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Shanghai hope Electric Manufacturing Co., Ltd.     TDGC2JSingle phase contact voltage regulator

 Product overview

TDGC2JSeries regulators are new energy saving products made of imported silicon steel sheets. This regulator pressesJB/T10091Design, manufacture and inspection of relevant standards.
Product features
This series of products has the following characteristics:
 
The output voltage can be regulated continuously0—250VIt has the characteristics of no distortion, small size, light weight, high efficiency, convenient operation, reliable performance, long term operation, etc..

Range of use

This series of voltage regulators can be widely used in industry(Such as chemical, metallurgical, instrument and meter, mechanical and electrical manufacturing, light industry, etc.), scientific experiments, utility equipment, household appliances, in order to achieve voltage regulation, temperature control, speed, power and dimming control purposes, is an ideal AC voltage electrical appliances.

technical parameter

Phase number

Single-phase

Rated frequency

50/60HZ

Rated input voltage rangeV

220V

Output voltage rangeV

0250

Specifications and mounting dimensions

Specification model

input voltage

output voltage

Rated output currentA

Product size(cm)

weight(kg)

Taiwan.

TDGC2JSeries single-phase voltage regulator

0.5KVA

220V

0-250V

2

14×16×20

4.2

6

1KVA

4

17×21×23

6.5

4

2KVA

8

21×25×23

11.8

2

3KVA

12

24×27×23

14.5

2

5KVA

20

35×38×27

26

1

7KVA

28

35×38×27

26.5

1

10KVA

40

35×43×43

54

1

15KVA

60

35×43×59

80

1

20KVA

80

35×43×59

83

1

30KVA

120

35×43×110

165

1

40KVA

160

35×43×110

171

1

Installation, use and maintenance

1The power supply voltage shall conform to the input voltage on the nameplate of the regulator;
2
The voltage regulator must be grounded properly to ensure safety;
3
The output current should not exceed the rated value, otherwise the life of the regulator will be reduced or even burned down;
4
When using, the handwheel should be rotated slowly and evenly, so as not to cause the brush damage or spark;
5
And should always check the use adjustable voltage regulator, such as brush wear too much, should be timely loss for defect, brush the same specifications, and with zero pad sandpaper handwheel several times in the brush below the bottom surface of the brush is removed, the contact is good, can be used;
6
Coil and brush contact surface should always be clean, otherwise easy to increase the spark and burn the coil surface. If the surface of the coil is burnt with black spots, it can be wiped with cotton alcohol until the surface spots are removed;
7
From the power supply to the regulator, the voltage regulator connected to the load wire and wire terminals should be in good contact and can pass the voltage regulator rated current;
8
When the regulator is moved, the handwheel can not be used, or the handle is lifted or the whole product is moved;
9
And you need to cross the regulator panel or stand mounted on the base can be used in other adjustable mounting hole pressure device base to be fixed;
10
The regulator often protects the clean water and does not allow water drops to fall into the regulator. The regulator must regularly cut off the dust accumulated inside the regulator;

Precautions for use

This series of voltage regulators should be used indoors, and the normal operating conditions are as follows:
1,
Ambient temperature: -15~+45
2,
Altitude not exceeding1000m
3,
Relative moderation:90%;
4,
Power voltage waveform: the voltage waveform of the power supply is approximately sinusoidal;

 5,The installation site should not seriously affect the gas regulator insulation of steam, chemical deposition, dust, dirt and other explosive and invasion of corrosive medium; the installation site should be no serious vibration;

 6,Indoor use;

 7,No parallel use,Otherwise it will burn out the voltage regulator

Because the product is constantly updated and upgraded! The transformer parameters and pictures are for reference only, and the company reserves the right of final interpretation!