Menu

Connect with us

Name:

price:USD$21.00
discount 70% in 2018-09-19 to 2018-09-21
price: USD$ 14.70
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Name:XY50TSR-40FSolid state voltage regulator

ModelXY50TSR-40F

Exterior size:43.5×57.2×29mm

 

First, the use and scope of application

 

XY50TSRA series of solid state voltage regulator with RC phase shift circuit, snubber circuit, a bidirectional thyristor output, a potentiometer can control the output load at both ends of the voltage waveform is used only to be adjusted with the completion of stepless voltage, power adjustment, easy to use.

XY50TSRThe solid state voltage regulator can be widely applied to the dimming of lighting equipment, the temperature control of resistive electric heating equipment and other power adjustment occasions.

 

Two, model and its meaning

 

Three. Technical parameters

 

 

 

 

Four. Instructions for use

6.1 The output of the thyristor controlled solid state voltage regulator is controlled by silicon controlled phase modulation waveform. When used, it will produce certain radio frequency interference. It is necessary to keep it away from the equipment which is susceptible to interference, and also to connect a inductance in the load loop to reduce the interference.

6.2 The input control terminal of the resistance type solid state voltage regulator is not isolated from the output control terminal, so it should be paid more attention to in use.

6.3 Actual work current in5AThe above solid state regulator should be equipped with an external radiator (the choice of radiator and the same as the solid state relay); pay attention to all aspects of the impact, it is recommended that users consider derating use, in order to leave room.

6.4 The resistance controlled solid state voltage regulator can be applied to the temperature regulation of the heater of the resistance furnace, the adjustment of the light regulation of the incandescent lamp and the output power regulation of the alternating current, and is not suitable for inductive loads (such as motors), capacitive loads, rectifying circuits, etc..

Five. Wiring diagram

 

Six, shape size