Menu

Connect with us

Factory direct pedal stool flushing valve, flushing valve, delay valve 3 specifications, 1 inch /6 sub interface

price:USD$62.00
discount 70% in 2018-07-15 to 2018-07-17
price: USD$ 43.40
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

[product name]: foot washing valve

[product material]: Brass

[product origin]: Fujian, Nanan

[size]: thread interface 1 inch /6 points (optional)

Body: the height of 92mm/ height between the upper and lower nuts (including nut) height 70mm/ net weight 407 grams (detail below)

Middle body: total height 103mm/, between upper and lower nut (including nut) height 79mm/, net weight 457 grams (detail below)

Gross height: 118mm/ height between top and bottom nuts (including nut) height 94mm/ net weight 598 grams (detail below)

The following size drawings are all original pictures without treatment. Please feel free to buy them according to the size of the actual needs

[body size details photos]

 

[details of the body size photos]

 

[size, details, photos]

This product is used to flush the toilet for 5 seconds, and it is convenient to save water

Shopkeepers promiseSuper value^^^Cheap and high quality! Wholesale price sales! No intermediate links, direct profit! Absolutely cost-effective!!

Product description

1The body is made of brass casting.
2After polished and polished, the coating has a gloss of two times as much as that of the ordinary faucet. It can improve the wear resistance and corrosion resistance. Compliance with international health standards. Over test by salt fog test200h,It has super corrosion resistance, bright and no fading, no wear.
3The valve core adopts an original ceramic plane with fine grinding surface, which has excellent sealing and wear resistance,60Ten thousand service life design.
4, bubbler outlet softening filter using a unique process, the water will not effusive.
5Before each faucet goes out of the factory100%To test the water and test the pressure, all the high pressure leakage test is through the hot and cold water1220KgHigh pressure oxygen pressure and a series of professional testing to ensure leak.

Installation instructions
1. before installation of the valve, it should first clear the debris in the clean pipe, so as not to damage the seal
2. when installing, remove the outlet pipe joint first. After the tap water pipe is tightened, the nut is put into the rubber sealing ring, then the valve body is screwed on, and then the water pipe is connected to the outlet
3., the outlet pipe can choose 1 inch galvanized pipe, at this time with thin oblique rubber seal, also can choose #32 stainless steel pipe or plastic pipe, at this time with thick oblique rubber seal, oblique rubber seal oblique upward
4. installation, please pay attention to the direction of water flow, water inlet and outlet can not flip, otherwise lead to the normal use
5. installed, connected to the water source, check each joint parts without leakage, can be put into use
6. usage: Seiko manufacturing delay self closing type toilet flushing valve for toilet facilities, hotel hotel public buildings \ \ \ \ \ \ \ \ industrial and mining enterprises, family and other occasions.